Mars Shuttle Mission

Location: Air Scrubber Door

As expected, they have locked the door, and you do not have the key. You are able to print a generic key using the PrintCo 3000 3D printer you brought with you. The only thing left is to pry off the lock plate, reconfigure the lock, enter the room and defuse the bomb before it goes off. Easy!

Objective: Enter the Air Scrubber

Enter the Unlock Code

####

Sorry, that is not the unlock code.

Congratulations! [pw1] is correct!

Click on the image below to examine the scene more closely.

Click on card to flip.

Hints

Hint #1

The top of the key is very tall, so no magnets should be positioned under the outer cylinder, so the key can be inserted fully.

Hint #2

The right side of the key is very short, so the red and blue cyliders should both have magets on the right side of the lock so the key can make contact.

Hint #3

The left side of the key is medium height, so only the red cylider should have a magnet on the left side of the lock.

Hint #4

The red cylinder should be rotated so that there are no magnets on the top, and magnets on both the left and right sides of the lock.

Hint #5

The blue cylinder should be rotated so that there is a magnet on the right side of the lock and none on the top and left sides.

Hint #6

The green cylinder should be positioned so that there are no magnets on any of the three insert locations

ANSWER

The unlock code is 7921.

ComCo 6000

TransPlanetary Communicator

Agents,

Congratulations on locating the bomb! We were unable to provide you the standard-issue disarm kit, so you will need to improvise. Best of luck! We are all counting on you!

Home Office Out!

Audio Transmission w/ Transcription

Continue